Transair Aluminum Pipe - Technical Data

Transair Since 1996!

Take a look at Transair Specifications Literature:


Aluminum Compressed Air Pipe System Specifications

All the components of the Transair aluminum compressed air pipe system conforms to the following specifications.

Suitable Fluids

Compressed air (dry, wet, lubricated), vacuum, inert gases (argon, nitrogen) and other fluids. For additional information please request a complete list of suitable fluids.

Working Temperature

-4°F to +140°F.

Maximum Working Pressure*

188 psi from -4°F to +140°F 232 psi from -4°F to +115°F *The maximum working pressure for 6″ is 175 PSI

Storage Temperature

-4°F to +176°F

Vacuum Level

98.7% (29.6’’ Hg)

Lubricant Compatibility

Compatible to all types of mineral and synthetic compressor oils

Resistance to

Corrosion, aggressive environments, mechanical shocks, thermal variations, UV and compressor oil carry over.

Fire Resistance

Components are non-flammable with no propagation of flame. The fittings in 40 mm, 25 mm, and 16.5 mm conform to UL94HB. The fixing clips conform to UL94V-2. The fire resistance of the compressed air flexible hose conforms to NFM82271 and the vacuum version to EN12115 flame resistance section.


Materials are 100% recyclable. Transair pipe, fittings and valves are guaranteed silicone free.

Maximum Working Pressure Chart

Go back to
Laws of Compressed Air
pertaining Transair Aluminum Pipe.

Move on to
offered by Transair Aluminum Pipe

Manufacturers Distributor, Inc., Manufacturers Producers, Odessa, FL

Content © Copyright | mdi - Manufacturers Distributor, Inc.
Site Use Acknowledges Acceptance of our Privacy Statement and our Terms of Service